Water spraying or gushing from a pipe, wall, ceiling, or under a sink. Here's what to do about burst pipes in Dallas–Fort Worth — including the local factors that change the advice.
Do this right now
Close the nearest valve first
If the burst is at a toilet, sink, or appliance, turn its small stop valve clockwise. This can stop the flow in seconds.
Shut off the main water valve
Can't find a local valve — or the break is in a wall? Close the main shutoff for the whole house now. Don't wait until you 'find' it; close first, label later.
Kill power near the water
If water is near outlets, appliances, or the breaker panel, stay out of standing water and don't touch breakers with wet hands.
Drain pressure safely
After the main is off, open a cold faucet at the lowest point in the house to relieve line pressure — only if it creates no new hazard.
Call for repair
Call (844) 699-1165. Tell us where the break is (wall, ceiling, crawlspace, under sink) and what the pipe looks like (copper, PEX, galvanized) if you can tell.
Burst Pipe in Dallas–Fort Worth? Talk to a local pro now.
Free for homeowners · 24/7 · Licensed local pros
What makes burst pipes different in Dallas–Fort Worth
- In Dallas–Fort Worth, hard freezes can crack outdoor hose bibs and attic water lines — the February 2021 freeze burst thousands of DFW pipes
- Homes here are often slab-on-grade ranch homes, mid-century houses, and newer subdivisions — which changes where pipes run and how hard they are to reach.
- Expansive clay soil shifts with moisture — one of the top slab-leak regions in the country
- Foundation movement here also stresses buried sewer laterals
Neighborhoods
If you're in Uptown, Deep Ellum, Oak Cliff, Bishop Arts, Highland Park, Lakewood, Arlington, Plano, Irving, Fort Worth, or anywhere across the Dallas–Fort Worth metro — Dallas, Fort Worth, Arlington, Plano, Irving — the steps above apply. Call (844) 699-1165 and mention your neighborhood so we match you with a pro who knows the area.
What to tell the pro when you call
- Your address and whether the main water is currently on or off
- Where the break is: interior wall, ceiling, crawlspace, basement, under a fixture
- Pipe material if visible — copper, PEX, CPVC, or galvanized
- What caused it if you know: freeze, renovation damage, corrosion, high pressure
- How much water reached floors, walls, or electrical areas
Not quite your problem?
| Slow drip or damp spot with no spray | Leak detection in Dallas–Fort Worth → |
| Ice in the line, little flow, not yet spraying | Frozen pipes in Dallas–Fort Worth → |
| Water coming from the water heater tank | Leaking water heater in Dallas–Fort Worth → |
Burst Pipe in Dallas–Fort Worth — FAQs
Are burst pipes common in Dallas–Fort Worth?
What should I mention about my Dallas–Fort Worth home when I call?
Can I patch a burst pipe myself temporarily?
How much does burst pipe repair cost?
More Dallas–Fort Worth plumbing guides
Main Water Shutoff Valve
You don't know where your main shutoff is (most common 'symptom').